ZL1 Side Rockers

Description SKU 48-4-039 PRM
Surface Finish
$479.00 USD
The ACS ZL1 Side Rockers for the Gen6 Camaro 
Upgrade your Gen6 Camaro with the ACS ZL1 Side Rockers, and give your car the track proven look it deserves. Made from our patented RTM composite material, which combines quality, durability and smooth finish for functional support to all Camaro drivers. This ground effects addition will set your Camaro apart from the competition, and turn heads driving down the freeway.

 

The ACS ZL1 Side Rockers were designed using OEM spec data for you with the perfect fit to the side of the Camaro. Don't settle for loosely fitting parts, when you can have side skirts that directly bolt up to the side, as if it came straight from the lot! 

 

Benefits:
The ZL1 is GM's track proven car from top to bottom. By adding those components to your Camaro it you will enhance it's already aggressive stance. At higher speeds, the ZL1 Side Rockers efficiently direct air toward the rear, as well as maintain the laminar properties of air to create down-force for added handling and enhanced control.
 
Moreover, side skirts act as protection against road debris such as stones and pebbles, which threaten the paint work on the side of your Camaro. By adding the ACS ZL1 Side Rockers, you can prevent the majority of paint chips from occuring as the side skirts will 'catch' the debris from being shot-up from underneath.
Features:
  • Enhanced aerodynamic performance.
  • Manufactured in ACS' RTM composite technology.
  • Installs within 15 minutes. Uses supplied split rivets.
  • Fits Gen6 Camaro
      What material are the ZL1 side skirts made of?

      The ZL1 side rockers are made in RTM Composite. ACS specializes in this type of manufacturing technique. It is a blend of polyester resins and strands of fiber that is put through heated high compression molds. The result is a highly rigid and durable body panel--Optimal for aerodynamic performance and ground effect kits.

      How well will this fit on my 2016+ Camaro? Do I need to modify the product or my car to get this to fit?

      All our products are designed using only GM OEM data. This means that the side rockers were digitally designed based on specifications of the 2016+ Camaro. This type of fit would not be achievable by hand-modelling. Additionally, you will not have to modify the product or your car to get this to fit. The only thing needed is to drill the required holes on the underside of the car.


      Do I need to drill holes into the car? Can I use two-way tape instead?

      Yes. Holes will need to be drilled into the bottom of the rocker panel (holes are pre-drilled on the side skirts to make the procedure easy for you). The use of two-way tape is not recommended, and we advise you to not use it as the down-force generated from driving will likely rip the rockers off from the tape.


      What is the difference between Primer, 1LE black, and Gloss Black?

      Primer is an unpainted surface and is an undercoating that is meant to be final sanded prior to paint. There are no UV stabilizers in the primer. Therefore, if installed as is, then overtime the sun will cause the primer to fade and deteriorate. 1LE Black is an satin black option. It is meant to look like a matte or dull black with no shine in it--similar to what is found on the 1LE packages. Gloss black is simply your typical high shine black paint.


      What type of hardware secures this product in place?

      Nearly all ACS Composite products install via rivets. When a rivet is secured in place it creates a mushroom effect through the hole--Similar to placing an umbrella through an equally-sized hole and opening the umbrella. This is great for securing panels in place. You can find a handheld rivet gun here.


      • Camaro SS 2016-2018
      • Camaro V6 2016-2018
      • Camaro I4 2016-2018
      Shipping Dimension: 88x9x6" 10 lbs.

      Related Products