Watt The Zap! ACS Composite releases a line of products for the Tesla Model 3

Watt The Zap! ACS Composite releases a line of products for the Tesla Model 3

ACS Composite releases a line of products for the Tesla Model 3

If you are searching for the best parts and accessories for the Tesla Model 3, then look no further. ACS Composite is the leader in aftermarket aero components for the Chevrolet Corvette and Camaro. We began as a hood manufacturer for the big OEM producers such as Ford and GM. We transitioned from a private label manufacturer to a direct-to-consumer manufacturer. We wanted to create an OEM aftermarket experience to the end-user--You!

As Elon Musk leads the helm of Tesla, a maverick in the automotive industry, one cannot deny that Tesla is out to change the world of motor cars. Are you a Tesla enthusiast looking to personalize and stand out from the rest of the EV crowd? Enter ACS Composite.

We specialize in designing and manufacturing parts that fit just like OEM, meet or exceed OEM quality, and provide an unmatched customer service. Don't let us convince you though! Take a look at what our customers have to say about us!

The ACS M3 Spoiler for Tesla Model 3 2018+

Our first product in our Tesla Model 3 lineup of mods is the ACS M3 Spoiler [Part number: 51-4-001 GBA]. The ACS M3 Spoiler wing draws inspiration from the Tesla Model 3 Performance Spoiler while combining two integrated wickers. The wickers extend outwards to further produce downforce whilst not sacrificing the drag coefficient of the Model 3, and improves high speed stability.

We top coated the M3 Spoiler in our elegant Gloss Black finish. The shiny black finish will accentuate the rear deck of your Tesla, and provide it will an overall distinguished appearance. 

ACS Composite Tesla Model 3 Rear Spoiler
You can buy the spoiler here: ACS Tesla Model 3 Spoiler @ $399.00 which includes Free Shipping!

How it's made

Whereas most aftermarket manufacturers choose to use inferior manufacturing processes, such as thermoform or hand-laying a Carbon Fiber Spoiler (with a single sheet to deliver a low-cost product), ACS Composite opts for a higher price point product that does not sacrifice on quality and fitment. ACS Composite utilizes plastic injection to ensure all our products are meeting and exceeding our stringent quality standards adopted by our OEM experience.

ACS Composite C7 Corvette Z06 Splitter being made in plastic injection
ACS Composite Tesla Model 3 Rear Spoiler

Equipped with data from the Model 3, our engineers designed the spoiler and its mold to be used for plastic injection. Hot liquid PC plastic is injected into the cavity and cooled until the M3 Spoiler is formed. The mold ensures that the part is made to specification every single time with no deviation. The part is then pulled from the mold, inspected, and sent off to paint. This means you get a part right out of the box that fits like it was meant for the Model 3.

ACS Composite Tesla Model 3 Rear Spoiler

What's in the box?

Inside the ACS Tesla Model 3 Spoiler box you will find a Gloss Black Spoiler with a pre-installed two-way tape, templates to guide the install, a 3M adhesion promotor, and a set of install instructions, and a lifetime of ACS Composite customer service.
Packaging an ACS Tesla Model 3 Spoiler

How does it install?

We designed the installation of the ACS Model 3 Spoiler to be feasible for any one of any skill. Gone are the days of needing to drop off your car at a dealership or bodyshop to install complicated aftermarket parts only to find out they don't work or fit. You can install the spoiler yourself, in your driveway in under an under hour! 

The best part? It is a fully reversible mod that can be removed and restored to stock if needed!

Here's what you need to do to install the ACS Composite Tesla Model 3 Spoiler

  1. Clean the car's deck surface with a 50-50 water to alcohol solution to strip the car of any waxes or other chemicals that may affect the hold.
    Clean the car's deck surface with a 50-50 water to alcohol solution to strip the car of any waxes or other chemicals that may affect the hold.
  2. Place the templates (included with the spoiler) on both ends of your Tesla's trunk. This will help locate the spoiler.
    Place the templates (included with the spoiler) on both ends of your Tesla's trunk. This will help locate the spoiler.
  3. Apply supplied Adhesion Promotor to create a long-lasting and secured hold between your Tesla and the ACS spoiler.
    Apply supplied Adhesion Promotor to create a long-lasting and secured hold between your Tesla and the ACS spoiler.
  4. Position the spoiler between the two templates.
    Position the spoiler between the two templates.
  5. Starting from the top-middle of the spoiler, peel the double sided tape and apply pressure as you make your way to the ends of the spoiler.
    Starting from the middle of the spoiler, peel the double sided tape and apply pressure as you make your way to the ends of the spoiler.
  6. Then, starting from the bottom-middle, peel the two-way tape and apply pressure as you make you way to the ends of the spoiler.
    Then, starting from the bottom-middle, peel the two-way tape and apply pressure as you make you way to the ends of the spoiler.
  7. Apply final pressure to the spoiler to ensure a sealed installation. 
    Apply final pressure to the spoiler to ensure a sealed installation.

 How-to Video and Product Overview

The ACS M3 Spoiler is only our first product in our Model 3 lineup. We will be releasing a splitter and side rockers to complete your aero kit with us. So make sure you are connected with us to be the first to know about the new releases!

Back to blog