ACS Camaro T2 Bumper Components Released for Production.
Transforming your New Camaro has never been easier using ACS’s Bumper ports and Splitters. ACS offers complete bumper assemblies or individual components to modify your own fascia. Two styling choices are offered; T2 and T3 product lines. Our most recent addition is our T2 line up; individual components can be installed on any Camaro RS and LS. If you are a Camaro SS owner don’t feel neglected the complete T2 bumper assembly is the perfect solution to eliminate the mail slot and increase airflow performance. T2 ports are installed on a genuine GM bumper using robots and dedicated fixtures, with the addition of the ACS T2 Cool-Rad Splitter airflow to the V8 engine’s radiator is improved, all this without altering the ride height of your Camaro.
A few guidelines while ordering your ACS T2 bumper components;
For Camaro SS owners; Complete T2 bumper assembly with the Cool-Rad option is recommended to improve the V8’s engine cooling capacity.
– An optional DRL mounting light kit is available in order to reinstall the stock Camaro light. Pn 33-4-041
– LED light strips can also be installed for maximum port airflow. Pn 33-4-043
– Stay tuned for our T1 lighting option which will reuse the stock Day Time Running light and adding a high performance driving light to be used for night driving or simultaneously with the halo’s for day driving. (Will fit in any T2 port)
To be released in June 2011.
For Camaro V6 RS and LS owners; Complete T2 Bumper assembly mentioned above can be installed to avoid trimming and modifying your stock fascia. Pn 33-4-041 The cost effective alternative is to modify your existing fascia.
T2 Ports can be installed on any V6 Camaro RS or LS bumper; installation kit includes two bumper ports with mounting rings, adhesive, locating template to trim your original bumper and installation instructions. Pn 33-4-035
T2 Standard Splitter can be installed on any V6 Camaro bumper. Will require 6 mounting holes to be drilled. Air from the center opening is redirected under the car’s carriage. Ride height is not altered. Template and mounting hardware included. Pn 33-4-020
T2 Splitter with Cool-Rad option can be installed on any V6 Camaro bumper, will require 6 mounting holes to be drilled along with 6 airflow slots to permit the T2 Splitter’s cool rad system to direct fresh air to the engine’s radiator. Template and mounting hardware included. Pn 33-4-026
Lighting Options:
– An optional DRL mounting light kit is available in order to reinstall the stock Camaro light. Pn 33-4-041
– LED light strips can also be installed for maximum port airflow. Pn 33-4-043
– Stay tuned for our T1 lighting option (Will fit in any T2 port) to be released in the coming weeks.