![ACS Composite L88 Extractor Hood for C6 Corvette [27-4-031]PRM: Lightweight, heat-resistant, and strong hood with efficient heat extraction and water management system.](http://acscomposite.com/cdn/shop/products/l88-extractor-hood-default-27-4-031-prm-18367639113.jpg?v=1699288613&width=1946)
- Current lead time: Four weeks.
ACS Composite
Hotte aspirante L88
Hotte aspirante L88
SKU:[27-4-031]PRM
Impossible de charger la disponibilité du service de retrait
Élevez votre Corvette C6 avec la hotte aspirante emblématique ACS Composite L88
Apportez un morceau de l'histoire de la Corvette à votre C6 avec la hotte aspirante ACS Composite L88. Fabriquée à partir d'un matériau composite RTM de pointe, cette cagoule est légère, résistante à la chaleur et solide. Le design emblématique du capot L88 offre un plus grand dégagement (environ 1'') que le capot d'origine pour des performances améliorées et un style agressif.
Avantages:
- Une seule persienne massive sur le capot assure une extraction efficace de la chaleur, même dans les conditions de conduite les plus intenses.
- Le capot est conçu avec un système de gestion de l'eau qui redirige l'eau de pluie et les débris qui pénètrent dans la persienne vers l'avant du véhicule, loin des composants sensibles du moteur.
- La hotte aspirante L88 nettoie la plupart des compresseurs à montage supérieur comme le Magnuson TVS, ce qui en fait la mise à niveau parfaite pour les amateurs de performances.
FAQ
FAQ
When should I book my bodyshop appointment?
You will likely want to wait until tracking is issued .
Hood FAQ
Are hood pins required?
No. Hood pins are not required. This hood installs just like OEM, and can withstand similar speeds.
How much does the hood weigh?
Approximately 30lbs.
Do I need new hood struts?
It depends on the age of your struts. The strut gas in the cylinder is known to dissipate and weaken.
Do you make it in Carbon Fiber?
No. It is only available in RTM Composite.
Installation
Installation
Hood Installation:
- Professional installation required.
- Trial fit: Always perform a trial fit before painting.
- C7 Corvette: Bumper removal is essential. Front hinge rail adjustments can be found underneath the front bumper.
Widebody Installation:
- Professional installation required.
- Trial fit: Ensure to fit-check before moving on to paint.
- Estimated install time: Work can range between 4-8 hours.
Additional notes:
Wrapping the hood or widebody: It's possible to wrap the panels. Always adhere to the specific guidelines of the wrap manufacturer. Most wraps will require a painted surface, not just primer.
Sorry, no install video is available. Check back later.
Material
Material
RTM Composite
A compression molding technique involving high pressure and heat to create a solid, smooth fiberglass panel. Stronger than hand layup.
Surface finish
Surface finish
The Hotte aspirante L88 comes in the following surface finish:
Primer
Vehicle fitment
Vehicle fitment
Shipping & Returns
Shipping & Returns
- Hoods & Widebodies ship for $450.00 USD.
- Must ship to a business (i.e., body shop / paint shop).
- Qualifies for a 30-day return if you are not fully satisfied.. See Return Policy for full details.
![ACS Composite L88 Extractor Hood for C6 Corvette [27-4-031]PRM: Lightweight, heat-resistant, and strong hood with efficient heat extraction and water management system.](http://acscomposite.com/cdn/shop/products/l88-extractor-hood-default-27-4-031-prm-18367639113.jpg?v=1699288613&width=1445)
-
Made in North America
Buy with confidence knowing each part was designed, made, and painted within North America.
Customer Builds
See how customers are using the Hotte aspirante L88 on their builds.
