![ACS Composite L88 Extractor Hood for C6 Corvette [27-4-031]PRM: Lightweight, heat-resistant, and strong hood with efficient heat extraction and water management system.](http://acscomposite.com/cdn/shop/products/l88-extractor-hood-default-27-4-031-prm-18367639113.jpg?v=1699288613&width=1946)
- Current lead time: Four weeks.
ACS Composite
Campana extractora L88
Campana extractora L88
SKU:[27-4-031]PRM
No se pudo cargar la disponibilidad de retiro
Eleve su Corvette C6 con la icónica campana extractora ACS Composite L88
Lleve un pedazo de la historia de Corvette a su C6 con la campana extractora ACS Composite L88. Fabricada con material compuesto RTM de última generación, esta campana es liviana, resistente al calor y resistente. El diseño icónico del capó L88 proporciona mayor espacio libre (aproximadamente 1'') que el capó original para un mejor rendimiento y un estilo agresivo.
Beneficios:
- Una enorme rejilla única en el capó garantiza una extracción eficiente del calor, incluso durante las condiciones de conducción más intensas.
- El capó está diseñado con un sistema de gestión de agua que redirige el agua de lluvia y los desechos que ingresan a la rejilla hacia la parte delantera del vehículo, lejos de los componentes sensibles del motor.
- La campana extractora L88 supera a la mayoría de los sobrealimentadores de montaje superior, como el Magnuson TVS, lo que la convierte en la actualización perfecta para los entusiastas del rendimiento.
FAQ
FAQ
When should I book my bodyshop appointment?
You will likely want to wait until tracking is issued .
Hood FAQ
Are hood pins required?
No. Hood pins are not required. This hood installs just like OEM, and can withstand similar speeds.
How much does the hood weigh?
Approximately 30lbs.
Do I need new hood struts?
It depends on the age of your struts. The strut gas in the cylinder is known to dissipate and weaken.
Do you make it in Carbon Fiber?
No. It is only available in RTM Composite.
Installation
Installation
Hood Installation:
- Professional installation required.
- Trial fit: Always perform a trial fit before painting.
- C7 Corvette: Bumper removal is essential. Front hinge rail adjustments can be found underneath the front bumper.
Widebody Installation:
- Professional installation required.
- Trial fit: Ensure to fit-check before moving on to paint.
- Estimated install time: Work can range between 4-8 hours.
Additional notes:
Wrapping the hood or widebody: It's possible to wrap the panels. Always adhere to the specific guidelines of the wrap manufacturer. Most wraps will require a painted surface, not just primer.
Sorry, no install video is available. Check back later.
Material
Material
RTM Composite
A compression molding technique involving high pressure and heat to create a solid, smooth fiberglass panel. Stronger than hand layup.
Surface finish
Surface finish
The Campana extractora L88 comes in the following surface finish:
Primer
Vehicle fitment
Vehicle fitment
Shipping & Returns
Shipping & Returns
- Hoods & Widebodies ship for $450.00 USD.
- Must ship to a business (i.e., body shop / paint shop).
- Qualifies for a 30-day return if you are not fully satisfied.. See Return Policy for full details.
![ACS Composite L88 Extractor Hood for C6 Corvette [27-4-031]PRM: Lightweight, heat-resistant, and strong hood with efficient heat extraction and water management system.](http://acscomposite.com/cdn/shop/products/l88-extractor-hood-default-27-4-031-prm-18367639113.jpg?v=1699288613&width=1445)
-
Made in North America
Buy with confidence knowing each part was designed, made, and painted within North America.
Customer Gallery
Check out these customer builds featuring the Campana extractora L88!
