2016 2017 2018 Camaro SS Front Splitter ZL1 Style | ACS Composite

ZL1 Splitter for Gen6 SS

Description SKU [48-4-031]GBA
Surface Finish
$599.00 USD $728.00 USD
The ACS ZL1 Splitter for the Gen6 Camaro SS
Was 728$, NOW 599$
Upgrade your SS with the ACS ZL1 Front Splitter, and give your car the track proven look it deserves. Made from our patented composite material, which combines quality and durability for functional support to all Camaro drivers. This front end addition will set your SS apart from the competition, and turn heads driving down the freeway.


The ACS ZL1 splitter was designed using GM data providing you with the perfect fit for your front end. Don't settle for loosely fitting parts, when you can have a splitter that bolts up to your front fascia, as if it came straight from the lot! 


The ZL1 is GM's track proven car from top to bottom. By adding those components to the SS it is only natural that the performance of your SS will be increased! At higher speeds, the ZL1 Splitter efficiently directs air around the front end while creating down-force for enhanced control. 
  • Enhanced aerodynamic performance.
  • Manufactured in ACS PC Composite technology.
  • Installs within 15 minutes.
  • Fits all 2016-2021  Camaro SS front fascias.


    What material is the ZL1 front splitter made of?

    The ZL1 splitter is made in RTM Composite. ACS specializes in this type of manufacturing technique. It is a blend of polyester resins and strands of fiber that is put through heated high compression molds. The result is a highly rigid and durable body panel--Optimal for aerodynamic performance and ground effect kits.
    Can I add the undertray provision brackets on my original splitter?/span>

    No. Unfortunately, you will need to a least have the splitter with the provision, if you plan on installing the undertray at a later date.
    How well will this fit on my SS? Do I need to modify the product or my car to get this to fit?

    All our products are designed using only GM OEM data. This means that the splitter was digitally designed based on specifications of the 2016+ Camaro SS. This type of fit would not be achievable by hand-modelling. Additionally, you will not have to modify the product or your car to get this to fit. The only thing needed is to drill the required holes on the underside of the fascia.

    Do I need to drill holes into the car? Can I use two-way tape instead?

    Yes. Holes will need to be drilled into the bottom of your front fascia (holes are pre-drilled on the splitter to make the procedure easy for you). The use of two-way tape is not recommended, and we advise you to not use it as the down-force generated from driving will likely rip the splitter off from the tape.

    What is the difference between Primer and Gloss Black?

    Primer is an unpainted surface and is an undercoating that is meant to be final sanded prior to paint. There are no UV stabilizers in the primer. Therefore, if installed as is, then overtime the sun will cause the primer to fade and deteriorate. Gloss black is simply your typical high shine black paint.

    What type of hardware secures this product in place?

    Nearly all ACS Composite products install via rivets. When a rivet is secured in place it creates a mushroom effect through the hole--Similar to placing an umbrella through an equally-sized hole and opening the umbrella. This is great for securing panels in place. You can find a handheld rivet gun here.

    Camaro SS 2016-2021
    Shipping Dimension: 72x24x5" 15lbs.