Zero1 Side Rockers

Description SKU 45-4-055 PRM
Surface Finish
X Primer:
Primer is an unfinished surface that will require a final sanding prior to painting. Primer is a great option for those looking to customize and/or paint the parts themselves or have a body shop handle the paint. Primer is not intended to be installed as is on a vehicle. There are no UV stabilizers in the primer coating and will, therefore, degrade over time when exposed to sunlight.

Textured black:
Textured black is an unpainted plastic finish look. It does match the fender extensions that go around the front wheel well of the Grand Sport and Z06. A very durable and chip resistant finish.

Carbon Flash Black:
CFZ is a black paint finish with a silver metallic flake in the paint. From far it appears as a gloss black finish; however, upon closer inspection a silver metallic flake can be seen inside the paint finish. CFZ matches all C7 Corvette accent pieces on the Corvette including the fender insert, hood insert, front grill, rear diffuser, and more. Carbon Flash Metallic Black is highly recommended by us for any Corvette parts.

display this>
$569.00 USD

The ACS Zero1 Side Rockers for the C7 Corvette Grand Sport, Z06 & Z07

A sleek and elegant design for the minimalist--The ACS Zero1 Side Rockers are a must have for any driver looking to protect their paintwork while maintaining a low profile look.

Not only do the the Zero1 side skirts protect your precious paintwork, they also improve the aerodynamic performance of your vehicle by manipulating the generated downforce from this performance car!

ACS Zero1 side rockers come fully prepped, primed, and ready for paint – smoothly molded and finished with a precision and finesse that truly stands out. Equally so, the ACS design team combines functionality with simplicity by using its mechanical fastener system for a quick installation process that will withstand the performance of this vehicle. Estimated install time: 30 minutes to 1 hour.

Features:

  • Protects OEM painted rocker panel.
  • Manufactured in an OEM-validated RTM composite material.
  • Enhanced aerodynamic performance at higher speeds.
  • Does not lower the ride height of the vehicle.
  • Contoured profile for easy access.
  • Smooth finish on either side for easy cleaning, and timeless look.
  • Mounted to the original OEM rocker panel.
  • Road Guard protective coating sprayed on inner surfaces for longevity and show finish.
  • Installation kit.

Available Finishes:

  • Black Primer with undercoating paint on inner surface.
  • Satin Black Finish with undercoating paint on inner surface.
  • Carbon Flash Finish with undercoating paint on inner surface.

Click the link below for a detailed installation guide!

http://acscomposite.com/blogs/news/69170885-installing-side-rockers-on-a-c7-corvette-stingray

 

     

     

      Are these easy to install?

      We consider installing side skirts as an easy-to-medium install difficultly. If jacking your car up, putting it on lifts or race ramps is something you frequently do, then installing side skirts will be an easy task for you. Having the car off the ground makes the install much easier.


      Is drilling required?

      Yes. Drilling is required; however, the OEM mounting points are also re-used. This is for added security, as these side skirts will generate down-force and naturally want to pull off the car. The use of two-way tape is not advised.


      How well do these fit on the Corvette?

      All ACS Composite products including side skirts are designed using OEM data. This means that the side skirt was digitally designed to precisely fit on the Corvette, as if they were stock items! This also means that no extra modifications need to be done to either the car or rockers to get them to fit.


      What material are the Zero1 Side Skirts made out of?

      The Zero1 side rockers are made out of RTM Composite, which is a manufacturing process involving high compression and heat on a blend of materials. This yields a highly precise and quality component that is equally rigid. This type of material is ideal for aerodynamic car components as they are durable, and can withstand higher speeds. It is stronger than a hand-layed fiberglass process


      What surface finish should I get?

      If you are wanting to paint the parts yourself or have someone else paint them, then Primer is the choice. Primer is an unpainted surface that requires a final sanding prior to paint. Satin Black is a matte finish similar to a plastidip effect. We do not recommend this finish unless you have a matte theme on your C7. Carbon Flash Metallic Black is our recommendation for our aeropacks. This color will match the trim pieces found on your C7 including the front grill, rear diffuser, fender inserts. Essentially, all black accent pieces are in Carbon Flash Metallic Black.

      • C7 Corvette Z06 2014-2019
      • C7 Corvette Grand Sport 2014-2019
      Shipping Dimension: 88x6x9" 10lbs